Filter
Top Products
301
Chapter 4, Description of Fields
Fields
Model:
This field is used to specify the type of printer used. If your printer is not listed in
the
Choices menu when you select this field, configure your printer to emulate
one of those that is listed.
Screens Where Field is Present
TESTS (Printer Setup)
PRINT CONFIGURE
Mod In To
This modulation input field defines how an external modulation source is used
with the RF Generator. Two fields are used:
• The upper field determines whether the rear-panel MODULATION INPUT signal is set
for AM or FM modulation of the RF GENERATOR.
• The lower field sets the modulation sensitivity. For instance, if FM (/Vpk) is selected
for the upper field, and you set the lower field to 1.0000 kHz, the RF Generator will
deviate 1 kHz for every 1 Volt peak at the MODULATION INPUT connector.
In addition, the peak deviation produced by MIC signals will be approximately
1 kHz.
Screens Where Field is Present
RF GENERATOR