Filter
Top Products
184
S:\agilent\e8285\REFGUIDE\MANUAL\fields.chp
Chapter 4, Description of Fields
Fields
Base ID
This field allows entry of the base station identification (BASE_ID).
GPIB Example
“DISP CCON;CDMA:CELL:CONFigure:BID 0“
sets the base identification of the simulated CDMA cell site to 0.
Operating Considerations
The mobile station acquires the BASE_ID when it receives the System
Parameters Message from the Test Set.
Screens Where Field is Present
CDMA CELL SITE CONFIGURATION
Beeper
This field changes the audio beeper volume by selecting the desired level from a
list of choices. The beeper always beeps when the instrument is turned on,
regardless of this setting.
Operating Considerations
The beeper alerts you any time a message is displayed. Since a message may be
removed from the screen before you notice it, it is better to leave the beeper on to
alert you to errors during operation.
The beeper’s volume setting is retained when the instrument is turned off.
Screens Where Field is Present
CONFIGURE