Filter
Top Products
371
Chapter 4, Description of Fields
Fields
RF Power
This field displays I
o
, the total power spectral density of Sector A power, Sector B
power and AWGN.
GPIB Example
“CDMA:RFP?”
queries the RF Power level.
Operating Considerations
RF Power is controlled by settings in the Sector A Power, Sector B Power,
and
AWGN fields. It is not directly settable.
Screens Where Field is Present
CDMA GENERATOR CONTROL
CDMA MOBILE REPORTED FER
CDMA REVERSE CHANNEL SPECTRUM
CDMA CELLULAR MOBILE TRANSMITTER TEST
Rgstr NID
This field allows entry of the cell site’s alternate network identification (NID),
used only for registration.
GPIB Example
“DISP CCON;CDMA:CELL:CONFigure:RNID 0“
sets the register network identification of the simulated CDMA cell site
to 0.
Operating Considerations
The Test Set will send the Rgstr NID and Rgstr SID during the registration
process (when the Register field is selected) in an attempt to cause a zone-based
registration to occur. Immediately following the zone-based registration, another
registration is performed using the NID and SID in the Network ID and System
ID fields. The latter values will determine if the mobile station is roaming.
Screens Where Field is Present
CDMA CELL SITE CONFIGURATION