Filter
Top Products
364
S:\agilent\e8285\REFGUIDE\MANUAL\fields.chp
Chapter 4, Description of Fields
Fields
RF Channel (CDMA)
This field is displayed on the screens listed below when the RF Display field on
the CONFIGURE screen is set to
Chan.
GPIB Example
“DISP CCNT;CDMA:RFCHannel 283“
selects channel 283.
Operating Considerations
This field re-tunes the Test Set to the selected channel number. If a call is
currently connected, this field initiates a CDMA-to-CDMA hard handoff.
The mobile station must be programmed for the serving system of the RF Channel
selected. For example, if the mobile station is programmed to “B only”, and
channel 283 (which is an “A” system channel) is selected, the handoff will not be
successful.
Screens Where Field is Present
CDMA CALL CONTROL
CDMA REVERSE CHANNEL SPECTRUM (When the
Controls field is set to
RF Gen)