Filter
Top Products
382
S:\agilent\e8285\REFGUIDE\MANUAL\fields.chp
Chapter 4, Description of Fields
Fields
Select Procedure Location
This field is used the select the location of the procedure to load. Procedures can
be loaded from disk, card, ROM, or RAM.
This field is used the select where a new procedure will be saved, or the location
from which a procedure will be deleted. Procedures can be saved to, or deleted
from, disk, card, or RAM.
Operating Considerations
Procedure files contain a subset of the library file. This is where you save all of
your own frequency, parameter, test sequence, specification, and system
configuration information.
To save a file to an external disk drive, you must enter the drive’s GPIB address
into the
External Disk Specification field on the TESTS (External
Devices) screen.
Screens Where Field is Present
TESTS (Save/Delete Procedure)
TESTS (Main Menu)
Send Msg
When Execute is selected, this field sends the message entered in the User
Data (ASCII)
or User Data (Hex) fields.
GPIB Example
“CDMA:SMS:TERM:SEND“
sends the message currently displayed in the User Data field
Operating Considerations
After Execute has been selected, the SMS Sent annunciator will light while the
Test Set waits for an SMS message acknowledgment from the mobile station. See
"MS Ack Rcvd (annunciator)" field on page 305.
Screens Where Field is Present
CDMA SHORT MESSAGE SERVICE