Filter
Top Products
199
Chapter 4, Description of Fields
Fields
Chan Std
This field is displayed when TIA/EIA-95B is selected in the Protocol field and
the System Type field, and is used during CDMA-to-CDMA (interband)
handoffs. The selection made in this field will specify the interband handoff’s
destination cell band and channel standard.
Range of Values
MS AMPS
US PCS
Kor PCS P0
Kor PCS P1
Japan CDMA
MS TACS
MS JTACS
GPIB Example
“CDMA:CALL:AHAN:CSTandard ‘MS AMPS’”
selects MS AMPS as the destination cell’s channel standard for a CDMA-to-
CDMA hard handoff.
Operating Considerations
An interband CDMA-to-CDMA hard handoff is performed by selecting TIA/EIA-
95B in both the Protocol and System Type fields, then selecting the Execute
field. A procedure is provided in the Application Guide chapter labeled
Intersystem Handoffs.
Screens Where Field is Present
CDMA CALL CONTROL
Check
This field is used to select whether the test will verify only upper, only lower,
both, or none of the specified limits.
Operating Considerations
Selecting both upper and lower limits increases test time, but may be required for
some tests.
Screens Where Field is Present
TESTS (Pass/Fail Limits)