Filter
Top Products
327
Chapter 4, Description of Fields
Fields
Page Send
This field is used to specify the message(s) to be sent on the paging channel.
GPIB Example
“CDMA:CELL:CONF:PAGE:SNDMode ‘AO-AK/ GP’”
specifies the message(s) to be sent.
Operating Considerations
Select among the following to specify the message or messages:
None – Only overhead message sent.
AO-AK – Audit Order message requiring AcKnowledgement.
AO-NA – Audit Order message Not requiring Acknowledgement.
GP – General Page message.
AO-AK/GP – Audit Order message requiring AcKnowledgement + plus General Page
message.
AO-NA/GP – Audit Order message Not requiring Acknowledgement + plus General
Page message.
The default selection is None. Using the default or selecting None sets the Test Set
so as to behave as it did for firmware revision A.04.54 or earlier.
The
GP, AO-AK/GP, and AO-NA/GP fields appear only if a valid protocol is
selected in the
Protocol field. The valid protocols are:
TIA-EIA-98-B
ARIB-53
J-STD-008
Kor PCS
Screens Where Field is Present
CDMA CELL SITE CONFIGURATION