Filter
Top Products
249
Chapter 4, Description of Fields
Fields
ESN (hex):
This field displays the electronic serial number (ESN), in hexadecimal form,
received from the mobile station on the reverse control channel in response to a
forward control channel message. The
ESN (hex): field is displayed only when
the
Display field is set to Data and a reverse control channel message
containing this information has been decoded.
Refer to the
"Display" field on page 223 for information on how to read
measurement results from this field.
Screens Where Field is Present
CALL CONTROL
ESN
This field is used to enter the electronic serial number (ESN) of the mobile station
into the Test Set. There are two methods which can be used to enter the
ESN. The
serial number can be captured by the Test Set through a registration order, or the
serial number can be entered as an 8-digit hexadecimal value directly into this
field.
To capture the electronic serial number through a registration, see
Register
(Analog)
field description, on page 358 for further information.
To enter the serial number directly use the :ESNumber command.
The query form of the command (that is, :ESNumber?) can be used to determine
the current setting of the ESN field.
Syntax
:ESNumber <’><8 character hex value><’>
:ESNumber?
Example
OUTPUT 714;"CALLP:AMPS:AUTH:ESN ’12D4E678’"
OUTPUT 714:"CALLP:AMPS:AUTH:ESN?"
ENTER 714;Esn_val$
Screens Where Field is Present
AUTHENTICATION