Filter
Top Products
161
Chapter 4, Description of Fields
Fields
Example
OUTPUT 714;"CALLP:AMPS:AUTH:AKEY:GEN"
OUTPUT 714;"CALLP:AMPS:AUTH:AKEY?"
ENTER 714;Akey_val$
Screens Where Field is Present
AUTHENTICATION
A-Key Digits
This field is used to enter the decimal digits used to generate the A_Key. When a
number is entered, the Test Set will add leading zeroes if necessary to fill the field
with 20 digits. The default setting is all zeroes.
GPIB Example
“CDMA:AUTH:AKEY ‘1’”
enters a 1 preceded by 19 0’s in the A-Key field.
Operating Considerations
When a new value for A_Key is entered into the A_Key field, the Test Set’s
Shared Secret Data (SSD_A) is initialized to zero.
Check Digits are computed and displayed if a valid ESN is present in the
MS
Database
when a number is entered in the A_Key field.
NOTE: Check Digits are not affected by ESN when Kor PCS is selected in the Protocol field.
See Also
"SSD Update (annunciator)" field on page 410
"Check Digits" field on page 200
Screens Where Field is Present
CDMA AUTHENTICATION