Filter
Top Products
420
S:\agilent\e8285\REFGUIDE\MANUAL\fields.chp
Chapter 4, Description of Fields
Fields
T_Add
This field allows entry of the pilot detection threshold T_ADD.
GPIB Example
“DISP CMOB;CDMA:MOBile:TADD 32“
sets T_ADD to 32.
Operating Considerations
If the mobile station finds that the Sector B pilot’s signal strength has exceeded
T_Add, the mobile station will send a Pilot Strength Measurement message to the
Test Set. The Test Set will display “Candidate” in the Status column of the CDMA
Mobile Reporting table for Sector B (identified by the PN Offset).
Screens Where Field is Present
CDMA MOBILE REPORTED PILOT STRENGTH
T_Comp
This field allows entry of the pilot detection threshold T_Comp.
GPIB Example
“DISP CMOB;CDMA:MOBile:TCOMp 3“
sets T_COMP to 3.
Operating Considerations
If the mobile station finds that the Sector B pilot’s signal strength has exceeded
Sector A by T_COMP
× 0.5, the mobile station will send a Pilot Strength
Measurement message to the Test Set. The Test Set will display “To Add” in the
Status column of the CDMA Mobile Reporting table for Sector B (identified by
the PN Offset).
Screens Where Field is Present
CDMA MOBILE REPORTED PILOT STRENGTH