Filter
Top Products
307
Chapter 4, Description of Fields
Fields
• Pwr Step - MIN_PWR_CNTL_STEP. Minimum closed loop power control step size
supported by mobile station. Possible values are: 1 dB, 0.5 dB, or 0.25 dB (message
parameters 0, 1, 2 respectively). Displayed when TIA/EIA-95B is selected in the
"Protocol" field on page 346
• Called Num - The number dialed on the mobile station handset during the last mobile
station originated call.
• *Clr All* - Selecting this Choice clears all MSDatabase values, allowing
verification that information currently displayed is not from a previous registration.
GPIB Example
“DISP CCNT;CDMA:MOBile:DAT ‘ESN’;:CDMA:MOBile:DAT:VALue?“
sets the desired indicator to “ESN” and returns the 4-digit value for ESN.
Operating Considerations
These indicators are updated each time a mobile registration occurs.
The database is cleared whenever the protocol is changed. (See
"Protocol" field on
page 346
for more information about changing protocol.)
Screens Where Field is Present
CDMA CALL CONTROL
CDMA SHORT MESSAGE SERVICE
CDMA AUTHENTICATION
MS FER
This field displays the mobile station’s reported FER (frame error rate). The
number displayed is a ratio of bad frames to total frames.
The mobile station can be commanded through the Test Set to change its periodic
FER reporting intervals through the
MS FER Report Interval field.
GPIB Example
“DISP CFER;CDMA:MOBile:FER?“
returns integer value of mobile station reported FER percentage.
See Also
MS FER Report Interval
field description, on page 308
by # errors
field description, on page 187
by # frames
field description, on page 188
Screens Where Field is Present
CDMA MOBILE REPORTED FER