Filter
Top Products
379
Chapter 4, Description of Fields
Fields
Sc Priority
This field allows the user to specify the search priority in sending the Extended
Neighbor List Message (ENLM).
GPIB Example
“CDMA:CELL:CONF:SCPR ‘Medium’”
sets the search priority level in the custom neighbor list.
Operating Considerations
Select Low, Medium, High, or Very High to set the search priority. The default is
Medium.
This field appears only if the
Ext NGBH field is set to On and a valid protocol is
selected in the
Protocol field. The valid protocols are:
TIA-EIA-98-B
ARIB-53
J-STD-008
Kor PCS
Screens Where Field is Present
CDMA CELL SITE CONFIGURATION
Scope To
Oscilloscope To selects the signal source for the Oscilloscope. This allows you to
bypass certain sections of the AF analyzer’s circuitry when viewing and
measuring a signal. It also allows you to select measurement paths that include
additional gain stages, improving the oscilloscope’s resolution when measuring
low-level signals.
See Also
"AF Analyzer Block Diagram" on page 85
Screens Where Field is Present
AF ANALYZER