Filter
Top Products
413
Chapter 4, Description of Fields
Fields
Status (CDMA Authentication)
This column in the authentication results table lists the status (pass or fail) of the
parameters that are used to authenticate a registration, page, or origination. These
parameters are returned from the mobile in the Access Channel Registration, Page
Response Message, or Origination Message.
See Also
Authen
field description, on page 170
Screens Where Field is Present
CDMA AUTHENTICATION
Status (CDMA Swept Power Measurement) ZZZZ (new)
This field display the arming status of the swept power measurement.
GPIB Example
“CDMA:SWEPtpower:STATus?’ <return_string>” ZZZZ ?????????????
queries for the arming status of the measurement.
Operating Considerations
If Arm has been selected in the Swept Pwr field, this field will be set to Armed to
indicate that the measurement has been armed and is awaiting a trigger. If
Arm has
not been selected, this field will be set to
Idle to indicate that the measurement
either has not been armed, or has been completed. The default setting is
Idle.
Screens Where Field is Present
CDMA SWEPT POWER MEASUREMENT (When the Controls field is set to
Main)