Filter
Top Products
363
Chapter 4, Description of Fields
Fields
RF Anl Freq (CDMA Swept Power Measurement)
This field allows the user to set the frequency of the Test Set RF analyzer.
GPIB Example
“RFANalyzer?FREQuency 836.520000“
selects the RF analyzer frequency.
Operating Considerations
This field appears on the screen when the RF Display field on the CONFIGURE
screen is set to
Freq. The setting re-tunes the Test Set RF analyzer to the selected
frequency.
Screens Where Field is Present
CDMA SWEPT POWER MEASUREMENT (When the Controls field is set to
Auxiliary)
RF Channel (analog)
The RF Channel field is displayed on the screens listed below when the RF
Display
field on the CONFIGURE screen is set to Chan.
This field displays the current channel number. Channel tuning eliminates the
need to transmit and receive frequencies directly into the Test Set. Once the
radio’s RF channel standard is selected, you only have to enter the channel
number to automatically set the
RF Generator and RF Analyzer to the correct
frequency.
Operating Considerations
To utilize the correct transmit and receive frequencies select the appropriate
channel standard from the
RF Chan Std field on the CONFIGURE screen.
Screens Where Field is Present
TX TEST
RF ANALYZER
SPECTRUM ANALYZER (When the
Controls field is set to RF Gen)