Filter
Top Products
Device Management
Polycom, Inc. 96
See also:
Endpoints
Add Alias Dialog
Edit Alias Dialog
Edit Devices Dialog
The Edit Devices dialog appears when you select multiple devices on the Endpoints page and click Edit
Devices. It lets you change certain settings for multiple devices at a time.
The following table describes the parts of the dialog.
See also:
Endpoints
Edit Device Dialog
Forward if busy If the device is busy, forward calls to the specified alias.
Registered endpoints can activate this feature by dialing the VSC for it (default is
*74) followed by the alias. They can deactivate it by dialing the VSC alone.
Forward unconditionally Forward all calls to the specified alias.
Registered endpoints can activate this feature by dialing the VSC for it (default is
*75) followed by the alias. They can deactivate it by dialing the VSC alone.
Alert when endpoint
unregisters
If the device unregisters from the Call Server or its registration expires, an
informational alert is triggered (see Alert 5003).
Field Description
Device authentication Indicates whether the selected devices must authenticate themselves.
Note: Inbound authentication for the device type must be enabled at the system
level (see Device Authentication), or the setting for these devices has no effect.
Permanent Prevents the registration of the selected devices from ever expiring.
Class of service Select to modify the class of service and the bit rate limits for calls to and from the
selected devices.
A call between two devices receives the higher class of service of the two.
Note: The class of service of the device applies to point to point calls. VMR calls use
the class of service of the conference room.
Maximum bit rate (kbps) The maximum bit rate for calls to and from the selected devices.
Minimum downspeed bit
rate (kbps)
The minimum bit rate to which calls from the selected devices can be downspeeded
to manage bandwidth. If this minimum isn’t available, the call is dropped.
Alert when endpoint
unregisters
If one of the selected devices unregisters from the Call Server or its registration
expires, an informational alert is triggered (see Alert 5003).
Field Description