Filter
Top Products
Integrations with Other Systems
Polycom, Inc. 180
To integrate with a RealPresence Resource Manager system
1 Go to Admin > Integrations > RealPresence Resource Manager.
2 In the Actions list, select Join RealPresence Resource Manager.
3 In the Join RealPresence Resource Manager dialog, enter the host name or IP address of the
Polycom RealPresence Resource Manager system and the credentials with which to log into it.
Then click OK.
4 When asked to confirm that you want to join, click Yes.
The system connects to the RealPresence Resource Manager system, establishes the integration,
and obtains site topology and user-to-device association data (this may take a few minutes). A dialog
informs you when the process is complete.
5 On the RealPresence Resource Manager page, verify the integration information.
6 Go to Network > Site Topology > Sites, and from there to the other site topology pages, to see the
site topology information obtained from the RealPresence Resource Manager system.
To terminate the integration with a RealPresence Resource Manager system
1 Go to Admin > Integrations > RealPresence Resource Manager.
2 In the Actions list, select Leave RealPresence Resource Manager.
3 When asked to confirm that you want to leave, click Yes.
The system connects to the RealPresence Resource Manager system and terminates the
integration. A dialog informs you when the process is complete.
4 On the RealPresence Resource Manager page, verify that the system is no longer integrated with
the RealPresence Resource Manager system.
The RealPresence DMA system retains the site topology and user-to-device association information
last obtained from the RealPresence Resource Manager system, but it’s now editable.
See also:
Integrations with Other Systems
RealPresence Resource Manager Integration
RealPresence Resource Manager Page
Join RealPresence Resource Manager Dialog
Note: Considerations for RealPresence Resource Manager integration
When you integrate a RealPresence Resource Manager system to the RealPresence DMA system
(from its management interface), the RealPresence DMA system automatically integrates itself back
to the RealPresence Resource Manager system, making it unnecessary to perform the integration
described here.
When you integrate the RealPresence Resource Manager system to a RealPresence DMA
supercluster with embedded DNS enabled (see Embedded DNS), in its Add DMA dialog, select
Support DMA Supercluster.