Filter
Top Products
Device Management
Polycom, Inc. 116
No user, configured peer’s Destination Network or next hop address — Uses the Destination network
value if specified, otherwise the peer’s Next hop address value. Equivalent to template:
#pscheme#:#pnetORphost#
Original user, configured peer’s Destination Network or next hop address — Uses the user in the
original, if specified, but replaces the host with the Destination network value, if specified, or the peer’s
Next hop address value. Equivalent to template:
#pscheme#:#otuser#@#pnetORphost#
Default Request-URI for Microsoft — Equivalent to template:
sip:#oruser#@#pnetORphost#:#pport#;transport=#ptransport#
Request-URI for Microsoft without CSS — Equivalent to template:
sip:#phost#:#pport#;transport=#ptransport#
Free Form Template — Format defined in associated Template field is used without further modification.
See Free Form Template Variables and To Header and Request-URI Header Examples.
Free Form Template Variables
In the Template fields on the Postliminary tab, and when specifying a Request-URI or other headers for
outbound registration (see Add Outbound Registration Dialog), you can use the variables in the following
table entered as #variable name# (case insensitive). The system replaces the variables with the
corresponding values as shown below.
You can also use these variables (without # delimiters) in a customized script.
In addition to the variables, you can enter any values acceptable for the Request-URI or To header.
For the Request-URI, the contents of the Template field specify only the URI portion of the full Request line.
Depending on network configuration, a Route header may be required.
Variable Description
otdisplay Original To header's display name.
otuser User portion of the original request's To header URL field.
othost Host/IP portion of the original request's To header URL field.
otscheme Original To header's URL scheme (sip, sips, tel).
phost Peer's configured IP/FQDN (next hop address).
pscheme Peer's configured scheme based on transport (sip, sips).
oruser User portion of the original request's Request-URL field.
orhost Host/IP portion of the original request's Request-URL field.
orscheme Original request's URL scheme.
pnetORphost Destination network parameter if specified, otherwise the peer's configured IP/FQDN.
pport The port specified for this SIP peer.
ptransport The transport type specified for this SIP peer.