Filter
Top Products
Local Cluster Configuration
Polycom, Inc. 79
Local Cluster Configuration Procedures
This section describes the following Polycom RealPresence DMA 7000 system configuration procedures:
● Add Licenses
● Configure Signaling
● Configure Logging
If you’re performing the initial configuration of your Polycom RealPresence DMA system, study Polycom
RealPresence DMA System Initial Configuration Summary before you continue. Other tasks are required
that are described elsewhere.
Add Licenses
You can add licenses to both Appliance Edition and Virtual Edition systems.
Add Licenses to the RealPresence DMA system, Appliance Edition
Adding licenses to your Polycom RealPresence DMA system, Appliance Edition, is a two-step process:
● Request a software activation key code for each server.
● Enter the activation key codes into the system.
Alert ID Threshold Condition Description
3103 Days until server certificate expires is less than Alert when there are only this many
days until the system’s security
certificate expires.
3105 Days until CA certificate expires is less than Alert when there are only this many
days until the server’s CA-signed
security certificate expires.
3401 Percentage available disk space is less than Alert when the percentage of free disk
space available on the DMA system
falls below this value.
3404 Percentage log file usage is greater than Alert when the percentage of the log
file storage area used by log data is
above this value.
3405 Percentage CPU utilization is greater than Alert when system CPU utilization is
between this lower limit, and...
And percentage CPU utilization is less than or equal to ...this upper limit.
3406 Percentage CPU utilization is greater than Alert when system CPU utilization is
above this value.
5002 Number of hyperactive, blacklisted endpoints is greater than Alert when the number of registered
endpoints that are blacklisted for
sending too much H.323 traffic is
above this value.