Filter
Top Products
Site Topology
Polycom, Inc. 298
See also:
About Site Topology
Site Links
Site Topology Configuration Procedures
Site-to-Site Exclusions
The Site-to-Site Exclusions page contains a list of the site-to-site connections that the site topology
doesn’t permit a call or session to use.
If the system is integrated with a RealPresence Resource Manager system, it receives this information from
that system, and this page is read-only. If not, you can define exclusions.
The commands in the Actions list let you add a site-to-site exclusion and delete existing exclusions.
The following table describes the fields in the list.
See also:
About Site Topology
Add Site-to-Site Exclusion Wizard
Site Topology Configuration Procedures
Add Site-to-Site Exclusion Wizard
Lets you define a new site-to-site exclusion in the Polycom RealPresence DMA system’s site topology.
Field Description
Name A meaningful name for the link (up to 128 characters).
Description A brief description of the link (up to 200 characters).
From site The originating site of the link (view only).
To site The destination site of the link (view only).
Max total bandwidth (Mbps) The total bandwidth limit for voice and video calls, which you set at the
gateway or router.
Max per-call bit rate (kbps) The per-call bit rate limit for voice and video calls, which you set at the
gateway or router.
When you specify both the bandwidth and bit rate limits, the dialog shows you
how many calls at that bit rate the specified bandwidth supports. The value of
the Bit rate to bandwidth conversion factor setting on the Call Server
Settings page is used in this calculation.
Column Description
From Site Name of one of the two sites connected by the excluded link.
To Site Name of the other site.