Filter
Top Products
Polycom, Inc. 61
Local Cluster Configuration
This section describes the following Polycom
®
RealPresence
®
Distributed Media Application™ (DMA
®
)
7000 system configuration topics:
● Network Settings
● Time Settings
● Licenses
● Signaling Settings
● Alerting Settings
● Logging Settings
● Local Cluster Configuration Procedures
● Automatically Send Usage Data
These are cluster-specific settings that are not part of the data store shared across superclustered systems.
See Introduction to the Polycom RealPresence DMA System.
If you’re performing the initial configuration of your Polycom RealPresence DMA system, study Polycom
RealPresence DMA System Initial Configuration Summary before you continue.
Network Settings
The following table describes the fields on the Network Settings page. In the Appliance Edition, most of
these values are normally set in the USB Configuration Utility during system installation and rarely need to
be changed. In the Virtual Edition, some of these settings are provisioned automatically when the system is
deployed with RealPresence Platform Director. See the Getting Started Guide and the Getting Started
Guide for a Virtual Environment.