Users and Groups
Polycom, Inc. 320
Presence In a Microsoft® Lync 2013 environment, you can configure presence publishing (the
publishing of VMR status to a Lync 2013 client contact list) for each VMR. Enable
this check box to override the system-wide default presence publishing settings
defined on the Admin > Conference Manager > Conference Settings page.
Note: This property is visible only if the Publish presence for Polycom conference
contacts check box is enabled on the Admin > Conference Manager >
Conference Settings page.
Depending on the settings of the Publish presence for Polycom conference
contacts and Create Polycom conference contacts check boxes on the Admin >
Conference Manager > Conference Settings page, there are two modes of
operation for this field:
• When Publish presence for Polycom conference contacts is checked and
Create Polycom conference contacts is unchecked, the following options are
displayed:
Publish presence
Do not publish presence
These options control whether the RealPresence DMA system will publish presence
status for this Polycom conference contact.
• When both Publish presence for Polycom conference contacts and Create
Polycom conference contacts are checked, the following options are displayed:
Create contact and publish presence
Do not create contact or publish presence
These options control whether the RealPresence DMA system will create an Active
Directory contact resource for and publish presence for this Polycom conference
contact.
Conference Duration Maximum duration of a conference (in hours and minutes) or Unlimited (the
maximum in this case depends on the MCU).
If not selected, the room uses the longest duration associated with any group to
which the user belongs, or if none, the system’s default maximum duration (see
Conference Settings).
Field Description