Filter
Top Products
System Management and Maintenance
Polycom, Inc. 362
See also:
Alerts
Alert 3205
Cluster <cluster>: DMA VE Soft RPP version is incompatible with license. No calls are
permitted.
The specified cluster’s version of software is not compatible with the installed license. The system will not
permit calls until a license that has been activated for this version of software is installed.
Click the link to go to the Licenses page to install the proper license activation key.
See also:
Alerts
Alert 3206
Cluster <cluster>: DMA is not licensed for any calls.
The current license for the specified cluster does not include the ability to make calls.
Click the link to go to the Licenses page to view licensing details or install a different license activation key.
See also:
Alerts
Networks
The following alerts provide information on network errors and connectivity.
Alert 3301
Cluster <cluster> is configured for 2 servers, but only a single server is detected.
One of the servers in the specified cluster is not responding to the other server over the private network that
connects them.
This could be a hardware problem, or the server in question may just need to be rebooted. It’s also possible
that the private network connection between the two servers has failed. Check the ethernet cable
connecting the GB2 ports and replace it if necessary.
See also:
Alerts
Alert 3302
Cluster <cluster> is configured for 1 server, but the private network interface is enabled
and active.
Either the cluster contains two servers but was incorrectly configured as a single-server cluster, or there is
only one server in the cluster but something is connected its GB2 port.
On a single-server cluster, don’t use the server’s GB2 port for anything.