Filter
Top Products
Conference Manager Configuration
Polycom, Inc. 188
Keep in mind that if you choose to remove all contacts across all SIP domains, the conference contacts
associated with other RealPresence DMA system superclusters that were removed by this action will be
automatically recreated daily, when the systems sync with Active Directory. You can also manually recreate
these contact resources by performing the following steps.
To manually recreate Lync 2013 contact resources associated with other superclusters
1 Log in to a system on one of the affected superclusters.
2 Go to Admin > Conference Manager > Conference Settings.
3 Deselect Publish presence for Polycom conference contacts.
4 Click Update.
5 Select Publish presence for Polycom conference contacts.
6 Click Update.
A caution dialog may appear regarding contact SIP domains for multiple superclusters.
7 Click OK.
8 Repeat steps 1 through 7 for any other affected superclusters.
See also:
Conference Settings
Microsoft
®
Lync
®
2013 Integration
Conference Templates
Conference templates are used to create users’ conference rooms, which define a user’s conference
experience. A conference template specifies a set of conference properties, such as the line (bit) rate and
video display mode.
Two Types of Templates
You can create a conference template in two ways:
● Specify the individual conference properties directly in the Polycom RealPresence DMA system,
creating a “standalone” (free-standing) template independent of the profiles available on the system’s
RealPresence Collaboration Server or RMX MCUs.
● Link the template to a RealPresence Collaboration Server or RMX profile that exists on some or all
of the MCUs.
Either kind of template can also include settings specific to Cisco Codian MCUs so that it can be used in
deployments containing both kinds of MCUs.
Note: Cisco Codian template settings
The Polycom RealPresence DMA system supports the use of some Cisco Codian MCUs, and
conference templates can include Codian-specific settings.