Filter
Top Products
MCU Management
Polycom, Inc. 129
The Actions list associated with the MCU list contains the items in the following table.
Registration Status The registration status of the device with the Call Server:
• Active — The device is registered and can make and receive calls.
• Inactive — The device’s registration has expired. Whether it can make and
receive calls depends on the system’s rogue call policy (see Call Server Settings).
It can register again.
• Permanent — The device’s registration never expires.
• Quarantined — The device is registered, but it can’t make or receive calls until
you remove it from quarantine.
• Quarantined (Inactive) — The device was quarantined, and its registration has
expired. It can register again, returning to Quarantined status.
• Blocked — The device is not permitted to register. Whether it can make and
receive calls depends on the system’s rogue call policy. It remains blocked from
registering until you unblock it.
A device’s registration status can be determined by:
• An action by the device.
• An action applied to it manually on this page.
• The expiration of a timer.
• The application of a registration policy and admission policy (see Registration
Policy).
Exceptions Shows any exceptions with which the device was flagged as a result of applying a
registration policy.
MCU Pools The MCU pools in which this MCU is used, if it’s enabled for conference rooms
(available as a conferencing resource for the Polycom RealPresence DMA system’s
Conference Manager).
Site The site in which the MCU is located (see Sites).
Command Description
View Details Opens the Device Details dialog for the selected MCU.
Add Opens the Add MCU dialog, where you can add an MCU to the pool of devices
known to the Polycom RealPresence DMA system.
Edit Opens the Edit MCU dialog for the selected MCU, where you can change its
information and settings.
Delete Removes the selected MCU from the pool of devices that are available to the
Polycom RealPresence DMA system as conferencing resources. A dialog asks you
to confirm.
You can’t delete an MCU if:
• The MCU is hosting one or more conferences. Busy out the MCU and wait for all
conferences to end.
• The MCU is registered with the Call Server. Unregister the MCU.
Column Description