Local Cluster Configuration
Polycom, Inc. 77
See also:
Signaling Settings
Local Cluster Configuration Procedures
Edit Guest Prefix Dialog
The Edit Guest Prefix dialog lets you edit an Unauthorized prefixes list entry in the SIP Settings section
of the Signaling Settings page.
The following table describes the fields in the Edit Guest Prefix dialog.
See also:
Signaling Settings
Local Cluster Configuration Procedures
Logging Settings
The following table describes the fields on the Logging Settings page.
Field Description
Prefix The prefix number for this entry.
This is the number that an SBC is configured to add to the Request-URI of the
first INVITE message for untrusted calls to the RealPresence DMA system.
Strip prefix Check this box to have the system immediately strip this prefix from the
INVITE message.
Authentication Select one of the following:
•None — The system doesn’t issue authentication challenges or check
authentication credentials for calls with this prefix.
• Authentication — The system issues authentication challenges and
checks authentication credentials for calls with this prefix.
The settings on the Device Authentication page (see Device
Authentication) determine the realm used for authentication and
whether the Call Server responds to unauthenticated requests with
401 (Unauthorized) or 407 (Proxy Authentication Required).
•Block — The system blocks calls with this prefix.
Field Description
Logging level Leave the default, Debug, unless advised to change it by Polycom support.
Production reduces system overhead and log file sizes, but omits information
that’s useful for troubleshooting. Verbose debug is not recommended for
production systems.
Rolling frequency If rolling the logs daily (the default) produces logs that are too large, shorten
the interval.