Site Topology
Polycom, Inc. 305
e Define the link. See Add Site Link Dialog.
f Repeat the previous two steps for each additional site linked to this cloud.
g Click OK.
8 Go to Network > Site Topology > Site-to-Site Exclusions, and for each exclusion in your network
topology, do the following:
a In the Actions list, click Add.
b Complete the Add Site-to-Site Exclusions wizard. See Add Site-to-Site Exclusion Wizard.
Your site topology information is complete. For a conference with cascading for bandwidth enabled, the
RealPresence DMA system can use it to route calls to the nearest eligible MCU (based on pools and pool
orders) that has available capacity and to create the cascade links between MCUs.
See also:
About Site Topology
Note: RealPresence Resource Manager integration replaces data
If in the future you integrate this system with a RealPresence Resource Manager system, the site
topology information from the RealPresence Resource Manager system will replace the information
you entered.