Filter
Top Products
Integrations with Other Systems
Polycom, Inc. 181
Juniper Networks SRC Integration
You can integrate the Polycom RealPresence DMA system’s Call Server with a Juniper Networks SRC
Series Session and Resource Control module to provide bandwidth assurance services. This allows the
RealPresence DMA system to consult a configured policy on the Juniper SRC system at call time to assure
and/or reserve required network resources for a call. It also allows priority and preemption policies to be
applied to RealPresence DMA system calls.
In addition, the RealPresence DMA system’s priority-based QoS packet marking (Gold/Silver/Bronze class
of service) is applied by the Juniper SRC system throughout the network it controls.
See also:
Integrations with Other Systems
Juniper Networks SRC Page
Juniper Networks SRC Integration Procedure
Juniper Networks SRC Integration Pane
Juniper Networks SRC Page
The following table describes the fields on the Juniper Networks SRC page.
See also:
Juniper Networks SRC Integration
Juniper Networks SRC Integration Pane
Field Description
Enable integration with Juniper
Networks® SRC
Enables the SRC integration fields and the Update button, which initiates a
connection to the Juniper Networks SRC server.
IP address or host name The host name or IP address of the SRC server.
Server port The port number used to connect to the SRC server.
Client ID The user ID with which the Polycom RealPresence DMA system logs into the
SRC server.
Client password The password with which the Polycom RealPresence DMA system logs into
the SRC server.
Subscriber URI The subscriber URI of an endpoint known to the SRC server, specified as in
this example:
ip:ipAddress=192.168.70.228
This can be any endpoint for which the SRC server will return information
when queried to test the connection.