Site Topology
Polycom, Inc. 297
See also:
About Site Topology
Add Site Link Dialog
Edit Site Link Dialog
Site Topology Configuration Procedures
Add Site Link Dialog
Lets you define a new site link in the Polycom RealPresence DMA system’s site topology. A link can connect
two sites, or it can connect a site to an MPLS network cloud (see Network Clouds).
The following table describes the fields in the dialog.
See also:
About Site Topology
Site Links
Site Topology Configuration Procedures
Edit Site Link Dialog
Lets you edit a site link in the Polycom RealPresence DMA system’s site topology. A link can connect two
sites, or it can connect a site to an MPLS network cloud (see Network Clouds).
You can’t change the sites that a site link connects. To modify how sites are linked, delete the links to be
removed and add the new links.
The following table describes the fields in the dialog.
Field Description
Name A meaningful name for the link (up to 128 characters).
Description A brief description of the link (up to 200 characters).
From site The originating site of the link.
To site The destination site of the link.
Max total bandwidth (Mbps) The total bandwidth limit for voice and video calls, which you set at the
gateway or router.
Max per-call bit rate (kbps) The per-call bit rate limit for voice and video calls, which you set at the
gateway or router.
When you specify both the bandwidth and bit rate limits, the dialog shows you
how many calls at that bit rate the specified bandwidth supports. The value of
the Bit rate to bandwidth conversion factor setting on the Call Server
Settings page is used in this calculation.