Filter
Top Products
System Management and Maintenance
Polycom, Inc. 376
contacts are configured for presence publishing, the RealPresence DMA system may be unable to publish
presence for all contacts during this interval, as the system registers one conference contact per second.
If suitable for your environment, either increase the ‘MaxEndpointExpiration’ value on the Lync server, or
decrease the number of Polycom conference contacts configured for publishing.
Click the link to go to the Network > External SIP Peers page.
See also:
Alerts
Alert 6202
Cluster <cluster>: Errors in presence publication for Lync server <lyncserver>. Presence
for <NN> of <MM> Polycom conference contacts will not be published because the
number of Polycom conference contacts configured for publishing exceeds ‘Maximum
Polycom conference contacts to publish’ configured on the system.
The system was unable to publish presence status for the specified number of Polycom conference contacts
because the Maximum Polycom conference contacts to publish value configured in the Lync server’s
External SIP Peer properties has been reached.
Click the link to go to the Network > External SIP Peers page to begin troubleshooting. If suitable for your
environment, increase the Maximum Polycom conference contacts to publish value.
See also:
Alerts
Alert 6203
Cluster <cluster>: Errors in presence publication for Lync server <lyncserver>. Presence
for <NN> of <MM> Polycom conference contacts will not be published: the system is
unable to complete publication within the expiration interval.
The system was unable to publish presence status for the specified number of Polycom conference contacts
within the number of seconds specified by the ‘MaxEndpointExpiration’ setting on the Lync server.
To publish presence status for Polycom conference contacts, the RealPresence DMA system registers each
contact with the Lync server every ‘MaxEndpointExpiration’ seconds. This alert could indicate heavy
RealPresence DMA system load or other performance-related factors during presence publishing.
If suitable for your environment, either increase the ‘MaxEndpointExpiration’ value on the Lync server, or
decrease the number of Polycom conference contacts configured for publishing.
Click the link to go to the Network > External SIP Peers page.
See also:
Alerts