Filter
Top Products
Site Topology
Polycom, Inc. 295
See also:
Add Site Dialog
Edit Site Dialog
Site Topology Configuration Procedures
Edit Subnet Dialog
Lets you edit a subnet associated with a site.
The following table describes the fields in the dialog.
Subnet mask length The CIDR (Classless Inter-Domain Routing) prefix size value (the number of
leading 1 bits in the routing prefix mask). This value, together with the IP
Address, defines the subnet.
For IPv4, a value of 24 is equivalent to specifying a dotted-quad subnet mask
of 255.255.255.0. A value of 16 is equivalent to specifying a dotted-quad
subnet mask of 255.255.0.0.
Max total bandwidth (Mbps) The total bandwidth limit for voice and video calls. If not specified, the site limit
applies.
Max per-call bit rate (kbps) The per-call bit rate limit for voice and video calls. If not specified, the site limit
applies.
When you specify both the bandwidth and bit rate limits, the dialog shows you
how many calls at that bit rate the specified bandwidth supports. The value of
the Bit rate to bandwidth conversion factor setting on the Call Server
Settings page is used in this calculation.
Note: Subnets and sites
You can assign a subnet to only one site.
Field Description
Name The name of the subnet. Required and must be unique.
IP address The IP address of the subnet.
Subnet mask length The CIDR (Classless Inter-Domain Routing) prefix size value (the number of
leading 1 bits in the routing prefix mask). This value, together with the IP
Address, defines the subnet.
For IPv4, a value of 24 is equivalent to specifying a dotted-quad subnet mask
of 255.255.255.0. A value of 16 is equivalent to specifying a subnet mask of
255.255.0.0.
Field Description