Filter
Top Products
Integrations with Other Systems
Polycom, Inc. 182
Juniper Networks SRC Integration Procedure
To configure SRC integration
1 Go to Admin > Integrations > Juniper Networks SRC.
2 Check Enable integration with Juniper Networks® SRC and specify the address of the SRC
server.
3 Specify the login credentials for the system to connect to the SRC server.
4 Specify the subscriber URI of an endpoint known to the SRC server, specified as in this example:
ip:ipAddress=192.168.70.228
This can be any endpoint about which the SRC server will return information when queried to test the
connection.
5 Click Update.
To verify that it can successfully communicate with the SRC server, the RealPresence DMA system
queries the SRC server about the endpoint you specified and confirms that the query is successful.
A dialog informs you that the configuration has been updated.
6 Click OK.
See also:
Juniper Networks SRC Integration
Juniper Networks SRC Page