Polycom RealPresence DMA System SNMP Support
Polycom, Inc. 435
1 Click Add Agent.
2 Configure the settings in the Add Notification Agent dialog box.
3 Click OK.
The agent appears in the Notification Agents list.
Edit Notification Agent Dialog
The Edit Notification Agent dialog lets you enable, disable, or modify an SNMP notification agent.
The following table describes the fields in the dialog.
Field Description
Enable agent Select to enable the notification agent.
Clear to stop using this agent without deleting it.
Transport The transport protocol for SNMP communications to the host receiver (TCP or UDP).
Address The IP address of the host receiver (the SNMP manager to which this agent sends
notifications).
Port The port that the RealPresence DMA system uses to send notifications. Default
port–162
Notification type The type of notification that this agent sends to the notification receiver:
• Inform–The agent sends an unsolicited message to a notification receiver and
expects or requires the receiver to respond with a confirmation message.
• Trap–The agent sends an unsolicited message to a notification receiver and does
not expect or require a confirmation message.
SNMP version The version of SNMP used for this agent (v2c or v3).
Security user For SNMP v3, the user name of the security user authorized to actively retrieve
SNMP data.
Setting Description
Enable agent Enables the notification agent defined below.
Clearing this check box lets you stop using this agent without deleting it.
Transport The transport protocol for SNMP communications to the host receiver (TCP or
UDP). See SNMP Overview.
Address The IP address of the host receiver (the SNMP manager to whom this agent
sends notifications).
Port Specify the port that the DMA system will use to send notifications. By default,
the DMA system uses port 162.