Filter
Top Products
set port media-type 91
See Also
clear port-group on page 71
display port-group on page 76
set port media-type Disables the fiber interface and enables the copper interface on an
WX4400 gigabit Ethernet port.
Syntax —
set port media-type port-list rj45
port-list—List of physical ports. MSS sets the preference on all the
specified ports.
rj45—Uses the copper interface.
Defaults — The GBIC (fiber) interface is enabled, and the copper
interface is disabled, by default.
Access — Enabled.
History — Introduced in MSS Version 4.0.
Usage — This command applies only to the WX4400.
If you set the port interface to RJ-45 on a port that already has an active
fiber link, MSS immediately changes the link to the copper interface.
Examples — The following command disables the fiber interface and
enables the copper interface on port 2:
WX4400# set port media-type 2 rj45
See Also
clear port media-type on page 72
display port media-type on page 81