Filter
Top Products
342 CHAPTER 11: MANAGED ACCESS POINT COMMANDS
display ap
boot-configuration
Displays information about the static IP address configuration (if any) on a
Distributed MAP.
Syntax —
display ap boot-configuration ap-number
ap-number — Index value that identifies the MAP on the WX.
Defaults — None.
Access — Enabled.
History —Introduced in MSS Version 4.2. Version 6.0 removed the dap
option, and added the following fields.
Field Mesh
Field Mesh SSID
Field Mesh PSK
Examples — The following command displays static IP configuration
information for Distributed MAP 1:
WX# display ap boot-configuration 1
Static Boot Configuration
AP: 7
IP Address: Disabled
VLAN Tag: Disabled
Switch: Disabled
Mesh: Disabled
IP Address:
Netmask:
Gateway:
VLAN Tag:
Switch IP:
Switch Name:
Mesh SSID:
Mesh PSK:
Table 64 describes the fields in this display.