Filter
Top Products
708 CHAPTER 22: SNOOP COMMANDS
display snoop stats Displays statistics for enabled snoop filters.
Syntax —
display snoop stats [filter-name [ap-num [radio {1 |
2}]]]
filter-name — Name of the snoop filter.
dap-num — Number of a Distributed MAP to which the snoop filter is
mapped
radio 1 — Radio 1 of the MAP
radio 2 — Radio 2 of the MAP. (This option does not apply to
single-radio models.)
Defaults — None.
Access — Enabled.
History —Introduced in MSS Version 4.0.
Usage — The MAP retains statistics for a snoop filter until the filter is
changed or disabled. The MAP then clears the statistics.
Examples — The following command shows statistics for snoop filter
snoop1:
WX1200# display snoop stats snoop1
Filter ap Radio Rx Match Tx Match Dropped Stop-After
===============================================================================
snoop1 3 1 96 4 0 stopped