Filter
Top Products
display ntp 159
Examples — The following command shows the status and port number
for the Telnet management interface to the WX switch:
WX4400> display ip telnet
Server Status Port
----------------------------------
Enabled 23
Table 38 describes the fields in this display.
See Also
clear ip telnet on page 141
display ip https on page 155
set ip https server on page 177
set ip telnet on page 181
set ip telnet server on page 182
display ntp Shows NTP client information.
Syntax — display ntp
Defaults — None.
Access — All.
History —Introduced in MSS Version 3.0.
Table 38 Output for display ip telnet
Field Description
Server Status State of the HTTPS server:
Enabled
Disabled
Port TCP port number on which the WX switch listens for Telnet
management traffic.