Filter
Top Products
16
RADIUS AND SERVER GROUP
COMMANDS
Use RADIUS commands to set up communication between a WX switch
and groups of up to four RADIUS servers for remote authentication,
authorization, and accounting (AAA) of administrators and network
users.
Commands by
Usage
This chapter presents RADIUS commands alphabetically. Use Table 91 to
locate commands in this chapter based on their uses.
(For information about RADIUS attributes, see the RADIUS appendix in
the Wireless LAN Switch and Controller Configuration Guide.)
Table 91 RADIUS Commands by Usage
Type Command
RADIUS Client set radius client system-ip on page 584
clear radius client system-ip on page 579
RADIUS Servers set radius on page 582
set radius server on page 587
clear radius on page 578
clear radius server on page 581
Server Groups set server group on page 589
set server group load-balance on
page 590
clear server group on page 581
RADIUS Proxy set radius proxy client on page 585
set radius proxy port on page 586
clear radius proxy client on page 580
clear radius proxy port on page 580