Filter
Top Products
display load 47
display load Displays CPU usage on a WX switch.
Syntax —
display load
Defaults — None.
Access — Enabled.
History — Introduced in MSS Version 4.1.
Examples — To display the CPU load recorded from the time the WX
switch was booted, as well as from the previous time the display load
command was run, type the following command:
WX4400# display load
System Load: overall: 2% delta: 5%
The overall field shows the CPU load as a percentage from the time the
WX switch was booted. The delta field shows CPU load as a percentage
from the last time the display load command was entered.
See Also
display system on page 47
display system Shows system information.
Syntax —
display system
Defaults — None.
Access — Enabled.