Filter
Top Products
614 CHAPTER 18: SESSION MANAGEMENT COMMANDS
telnet client [session-id] — Clears all Telnet client sessions from
the CLI to remote devices, or clears an individual session identified by
session ID.
mesh-ap [session-id] — Clears all Mesh AP sessions, or clears an
individual Mesh AP session identified by session ID.
Defaults — None.
Access — Enabled.
History —Introduced in MSS Version 3.0.
Examples — To clear all administrator sessions type the following
command:
WX4400# clear sessions admin
This will terminate manager sessions,
do you wish to continue? (y|n) [n]y
To clear all administrative sessions through the console, type the
following command:
WX4400# clear sessions console
This will terminate manager sessions,
do you wish to continue? (y|n) [n]y
To clear all administrative Telnet sessions, type the following command:
WX4400# clear sessions telnet
This will terminate manager sessions,
do you wish to continue? (y|n) [n]y
To clear Telnet client session 0, type the following command:
WX4400# clear sessions telnet client 0
See Also
display sessions on page 616