Filter
Top Products
454 CHAPTER 11: MANAGED ACCESS POINT COMMANDS
Examples — The following command configures service profile sp3 to
use passphrase “1234567890123<>?=+&% The quick brown fox jumps
over the lazy sl”:
WX4400# set service-profile sp3 psk-phrase "1234567890123<>
?=+&% The quick brown fox jumps over the lazy sl"
success: change accepted.
See Also
display service-profile on page 353
set mac-user attr on page 261
set service-profile auth-psk on page 435
set service-profile psk-raw on page 454
set service-profile wpa-ie on page 481
set service-profile
psk-raw
Configures a raw hexadecimal preshared key (PSK) to use for
authenticating WPA clients, in a service profile. Radios use the PSK as a
pairwise master key (PMK) to derive unique pairwise session keys for
individual WPA clients.
Syntax —
set service-profile name psk-raw hex
name — Service profile name.
hex — A 64-bit ASCII string representing a 32-digit hexadecimal
number. Enter the two-character ASCII form of each hexadecimal
number.
Defaults — None.
Examples — Enabled.
History —Introduced in MSS Version 3.0.
Usage — MSS converts the hexadecimal number into a 256-bit binary
number for system use. MSS also stores the hexadecimal key in the WX
configuration. The binary number is never displayed in the configuration.
To use PSK authentication, you must enable it and you also must enable
WPA IE.