Filter
Top Products
set ip https server 177
success: change accepted.
WX1200# set ip dns server 10.10.30.69/24 secondary
success: change accepted.
See Also
clear ip dns domain on page 139
clear ip dns server on page 139
display ip dns on page 154
set ip dns on page 175
set ip dns domain on page 175
set ip https server Enables the HTTPS server on a WX. The HTTPS server is required for Web
View access to the switch.
CAUTION: If you disable the HTTPS server, Web View access to the WX
switch is also disabled.
Syntax —
set ip https server {enable | disable}
enable — Enables the HTTPS server.
disable — Disables the HTTPS server.
Defaults — The HTTPS server is disabled by default.
Access — Enabled.
History — The default is changed to disabled in 3.1. In addition, the
HTTPS server is no longer required for WebAAA.
Examples — The following command enables the HTTPS server on a WX
switch:
WX1200# set ip https server enable
success: change accepted.
See Also
clear ip telnet on page 141
display ip https on page 155
display ip telnet on page 158
set ip telnet on page 181
set ip telnet server on page 182