Filter
Top Products
506 CHAPTER 12: STP COMMANDS
See Also
clear spantree portcost on page 484
clear spantree portvlancost on page 485
display spantree on page 488
display spantree portvlancost on page 494
set spantree portvlancost on page 508
set spantree
portfast
Enables or disables STP port fast convergence on one or more ports on a
wireless LAN switch.
Syntax —
set spantree portfast port port-list {enable | disable}
port port-list — List of ports. MSS enables the feature on the
specified ports.
enable — Enables port fast convergence.
disable — Disables port fast convergence.
Defaults — STP port fast convergence is disabled by default.
Access — Enabled.
History —Introduced in MSS Version 3.0.
Usage — Use port fast convergence on ports that are directly connected
to servers, hosts, or other MAC stations.
Examples — The following command enables port fast convergence on
ports 2, 5, and 7:
WX1200# set spantree portfast port 2,4,7 enable
success: change accepted.
See Also
display spantree portfast on page 493