Filter
Top Products
set ip dns 175
set ip dns Enables or disables DNS on a wireless LAN switch.
Syntax —
set ip dns {enable | disable}
enable — Enables DNS.
disable — Disables DNS.
Defaults — DNS is disabled by default.
Access — Enabled.
History— Introduced in MSS Version 3.0.
Examples — The following command enables DNS on a WX switch:
WX1200# set ip dns enable
Start DNS Client
See Also
clear ip dns domain on page 139
clear ip dns server on page 139
display ip dns on page 154
set ip dns domain on page 175
set ip dns server on page 176
set ip dns domain Configures a default domain name for DNS queries. The WX appends the
default domain name to domain names or hostnames you enter in
commands.
Syntax —
set ip dns domain name
name — Domain name of between 1 and 64 alphanumeric characters
with no spaces (for example, example.org).
Defaults — None.
Access — Enabled.
Usage — To override the default domain name when entering a
hostname in a CLI command, enter a period at the end of the hostname.
For example, if the default domain name is example.com, enter
chris. if
the fully qualified hostname is chris and not chris.example.com.