Filter
Top Products
clear dot1x tx-period 599
clear dot1x
tx-period
Resets to the default setting the number of seconds that must elapse
before the WX switch retransmits an EAP over LAN (EAPoL) packet.
Syntax —
clear dot1x tx-period
Defaults — The default is 5 seconds.
Access — Enabled.
History —Introduced in MSS Version 3.0.
Examples — Type the following command to reset the EAPoL
retransmission time:
WX4400# clear dot1x tx-period
success: change accepted.
See Also
display dot1x on page 599
set dot1x tx-period on page 610
display dot1x Displays 802.1X client information for statistics and configuration
settings.
Syntax —
display dot1x {clients | stats | config}
clients — Displays information about active 802.1X clients,
including client name, MAC address, and state.
stats — Displays global 802.1X statistics associated with connecting
and authenticating.
config — Displays a summary of the current configuration.
Defaults — None.
Access — Enabled.