Filter
Top Products
118 CHAPTER 5: VLAN COMMANDS
See Also
display vlan config on page 118
display vlan config Shows VLAN information.
Syntax — display vlan config [vlan-id]
vlan-id — VLAN name or number. If you do not specify a VLAN,
information for all VLANs is displayed.
Defaults — None.
Access — All.
History —Introduced in MSS Version 3.0.
Examples — The following command displays information for VLAN
burgundy:
WX1200# display vlan config burgundy
Admin VLAN Tunl Port
VLAN Name Status State Affin Port Tag State
---- ---------------- ------ ----- ----- ---------------- ----- -----
2 burgundy Up Up 5
2 none Up
3 none Up
4 none Up
6 none Up
4094 web-aaa Up Up 0
2 4094 Up
t:10.10.40.4 none Up
Remote Address IP address of the remote end of the tunnel. This is the
system IP address of another WX switch in the mobility
domain.
State Tunnel state:
Up
Dormant
Port Tunnel port ID.
LVID Local VLAN ID.
RVID Remote VLAN ID.
Table 24 Output for display tunnel (continued)
Field Description