Filter
Top Products
150 CHAPTER 7: IP SERVICES COMMANDS
display dhcp-server Displays MSS DHCP server information.
Syntax —
display dhcp-server [interface vlan-id] [verbose]
interface vlan-id — Displays the IP addresses leased by the
specified VLAN.
verbose— Displays configuration and status information for the MSS
DHCP server.
Defaults — None.
Access — All.
History — Introduced in MSS Version 4.0.
Examples — The following command displays the addresses leased by
the MSS DHCP server:
WX1200# display dhcp-server
VLAN Name Address MAC Lease Remaining (sec)
---------- -------- ----------- -------------------------
1 default 10.10.20.2 00:01:02:03:04:05 12345
1 default 10.10.20.3 00:01:03:04:06:07 2103
2 red-vlan 192.168.1.5 00:01:03:04:06:08 102
2 red-vlan 192.168.1.7 00:01:03:04:06:09 16789
The following command displays configuration and status information for
each VLAN on which the DHCP server is configured:
WX1200# display dhcp-server verbose
Interface: 0 (Direct AP)
Status: UP
Address Range: 10.0.0.1-10.0.0.253
Interface: default(1)
Status: UP
Address Range: 10.10.20.2-10.10.20.254
DHCP Clients:
Hardware Address: 00:01:02:03:04:05
State: BOUND
Lease Allocation: 43200 seconds
Lease Remaining: 12345 seconds
IP Address: 10.10.20.2
Subnet Mask: 255.255.255.0