Filter
Top Products
display ap fdb 325
See Also
display sessions network on page 620
display ap fdb Displays the entries in a specified MPís forwarding database.
Syntax — display ap fdb ap-number
ap-number — Index value that identifies the MAP on the WX.
Defaults — None.
Access — All.
History — Introduced in MSS Version 6.0.
Examples — The following command displays FDB entries for AP 7:
WX# display ap fdb 7
AP 7:
# = System Entry. $ = Authenticate Entry
VLAN TAG Dest MAC/Route Des [CoS] Destination Ports
---- --- ------------------ ----- -----------------
4095 4095 00:0b:0e:00:ca:c1 # CPU
4095 0 00:0b:0e:00:04:0c eth0
Table 55 describes the fields in the display ap fdb output.
Table 55 Output for display ap fdb
Field Description
VLAN VLAN number.
TAG VLAN tag value. If the interface is untagged, the TAG field is
blank.
Dest MAC/Route Des MAC address of this forwarding entryís destination.
CoS Type of entry. The entry types are explained in the first row
of the command output.
Note: This Class of Service (CoS) value is not associated with
MSS quality of service (QoS) features.
Destination Ports WX switch port associated with the entry. A switch sends
traffic to the destination MAC address through this port.