Filter
Top Products
640 CHAPTER 19: RF DETECTION COMMANDS
Table 105 describes the fields in this display.
See Also
set radio-profile countermeasures on page 410
display rfdetect
counters
Displays statistics for rogue and Intrusion Detection System (IDS) activity
detected by the MAPs managed by a WX switch.
Syntax —
display rfdetect counters
Defaults — None.
Access — Enabled.
History —Introduced in MSS 4.0.
Table 105 display rfdetect countermeasures Output
Field Description
Rogue MAC BSSID of the rogue.
Type Classification of the rogue device:
rogue—Wireless device that is on the network but is not
supposed to be on the network.
intfr—Wireless device that is not part of your network and
is not a rogue, but might be causing RF interference with
MAP radios.
known—Device that is a legitimate member of the
network.
Countermeasures
Radio MAC
MAC address of the 3Com radio sending countermeasures
against the rogue.
WX-IPaddr System IP address of the WX switch that is managing the
MAP that is sending or will send countermeasures.
Port/Radio/Channel Port number, radio number, and channel number of the
countermeasures radio.