Filter
Top Products
530 CHAPTER 13: IGMP SNOOPING COMMANDS
See Also
set igmp lmqi on page 526
set igmp qi on page 531
set igmp qri on page 532
set igmp querier on page 533
set igmp mrouter on page 527
set igmp rv on page 534
set igmp
proxy-report
Disables or reenables proxy reporting by a WX on one VLAN or all VLANs.
Syntax —
set igmp proxy-report {enable | disable}
vlan vlan-id — VLAN name or number. If you do not specify a
VLAN, proxy reporting is disabled or reenabled on all VLANs.
enable — Enables proxy reporting.
disable — Disables proxy reporting.
Defaults — Proxy reporting is enabled on all VLANs by default.
Access — Enabled.
History — Introduced in MSS Version 3.0.
Usage — Proxy reporting reduces multicast overhead by sending only
one membership report for a group to the multicast routers and
discarding other membership reports for the same group. If you disable
proxy reporting, the WX sends all membership reports to the routers,
including multiple reports for the same group.
Examples — The following example disables proxy reporting on VLAN
orange:
WX1200# set igmp proxy-report disable vlan orange
success: change accepted.
See Also
set igmp rv on page 534