Filter
Top Products
72 CHAPTER 4: PORT COMMANDS
clear port
media-type
Disables the copper interface and reenables the fiber interface on an
WX4400 gigabit Ethernet port.
Syntax —
clear port media-type port-list
port-list—List of physical ports. MSS disables the copper interface
and reenables the fiber interface on all the specified ports.
Defaults — The GBIC (fiber) interface is enabled, and the copper
interface is disabled, by default.
Access — Enabled.
History — Introduced in MSS Version 4.0.
Usage — This command applies only to the WX4400. This command
does not affect a link that is already active on the port.
Examples — The following command disables the copper interface and
reenables the fiber interface on port 2:
WX4400# clear port media-type 2
See Also
set port media-type on page 91
display port media-type on page 81
clear port name Removes the name assigned to a port.
Syntax —
clear port port-list name
port-list — List of physical ports. MSS removes the names from all
the specified ports.
Defaults — None.
Access — Enabled.
History — Introduced in MSS Version 3.0.